 |
Features
Our Airbags are burst tested to 600psi. Any bag we sell is 100% unconditionally guaranteed for as long as you own them. This means if you ever have a defect, we will replace it free. This does not include damage caused by contact with any object, or dry rotting, where the bag is exposed to UV light and direct sunlight. UV/sunlight will cause cracking of the outside skin over extended periods. Just like your skin would wrinkle up exposed to sunlight over extended periods of time. Dry rot affects the outside rubber skin, but has no effect on the safety or strength of the bag. The strength of a bag comes from the synthetic cords under the outer rubber skin. Brackets should be only tack-welded in place until you are SURE of the position and bag travel. Tack-weld, mount the bags on the brackets, then, using a Schrader fill valve, air the bag up and confirm that the bag does not rub, and the bracket is at the right height. The height of the bracket determines the "Sweetspot" for the best ride height. If the bag takes too much pressure to lift to your ride height, then either the bracket is too short, or the bag is not large enough in diameter. ALWAYS install the largest diameter bag possible, even if you have to trim your frame or install Spring Pocket Eliminators. A bag should never require more than 120psi to lift your front end. If it does, you are doing something wrong.
|
|
|
